LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (1.8L & 2.0L - Lubrication - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 17 Lubrication >> Removal And Installation >> Oil Level Thermal Sensor -G266- >> Installing

Oil Level Thermal Sensor -G266-: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Oil Level Thermal Sensor
GWWN17-10356Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install in reverse order of removal. Note the following:

-- Replace the seal -2-.

-- Fill with engine oil and then check the level.

scientia non olet · About LEMON Manuals