LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (2.0L - Engine Lubrication - Engine Code(S): CJAA & CVCA (Hatchback)) >> 17 Engine Lubrication >> Diagnosis And Testing >> Oil Pressure, Checking >> Procedure

Oil Pressure, Checking: Procedure

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The specified values pertain to oil temperatures from approximately 80°C (176°F). Remove the dip stick or higher oil temperatures. Check, if necessary, if the oil temperature for this test is too high (> 120°C (> 248°F)), and if the specified values are not attained.

-- Remove the Oil Pressure Switch -F1-. Refer to Oil Pressure Switch -F1- .

-- Connect the Oil Pressure Gauge V.A.G 1342 in the opening for the Oil Pressure Switch -F1-.

-- Install an old oil pressure switch into the hole on the Oil Pressure Gauge V.A.G 1342.

-- Start the engine.