LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (2.0L - Lubrication - Engine Code(S): CBFA & CCTA (Hatchback)) >> 17 Lubrication >> Specifications >> Fastener Tightening Specifications >> Upper Oil Pan Bolt Tightening Sequence and Specification

Upper Oil Pan Bolt Tightening Sequence and Specification

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Upper Oil Pan Bolt Tightening Sequence
GWWA17-10273Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the new bolts in 3 passes in sequence -1 through 14- as follows:

  1. Tighten the bolts hand tight
  2. Tighten the bolts to 15 Nm
  3. Tighten the bolts an additional 90° (1/4) turn
scientia non olet · About LEMON Manuals