LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 153 (2.0L - Lubrication - Engine Code(S): CVCA (Hatchback)) >> 17 Lubrication >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Oil cap - 25
Oil dipstick tube bolt - 8
Oil drain plug - 5
Oil drain plug, oil pan lower section - 30
Oil filter housing - tightening specification and sequence - Refer to Figure
Oil intake pipe bolt - 8 + 90°
Oil level thermal sensor 1 - 8
Oil level thermostat - 9
Oil pan lower section, tightening specification and sequence - Refer to Figure
Oil pan upper section, tightening specifications and sequence - Refer to Figure
Oil pan - tightening specifications and sequence with one piece oil pan - Refer to Figure
Oil pressure regulation valve bolt - 8
Oil pressure switch - 20
Oil pump bolt    
Hex head bolt - 10 + 180°
Torx® head bolt - 12 + 180°
Reduced oil pressure switch - 20
  • 1 Always replace