LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (Controls, Housing - Manual Transmission 0A4 (Hatchback)) >> 34 Controls, Housing >> Removal And Installation >> Transmission, Transporting

Transmission, Transporting

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required 

-- Attach the transmission support jig 3336 to the clutch housing.

Fig 1: Identifying Transmission Support Jig 3336 Secured To Clutch Housing
GWWN34-0034

-- Unlock and move the bar -arrow- using the locking bolt.

Fig 2: Adjusting Support Arm On Sliding Piece With Locking Pin
GWWN34-0032

Number of visible holes = 5.

-- Lift the transmission using the shop crane - load cap = 700-1200 KG VAS 6100 and transmission support jig 3336.

-- Set the transmission down, for example, into the transport container.

scientia non olet · About LEMON Manuals