Disassembly And Assembly: Transmission: Notes
WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Holding Plate VW 309
- Transmission Support VW 353
- Needle Bearing Drift VW 295
- Driving Sleeve VW 244 B
- Hot Air Blower VAG 1416
- Torque Wrench 1331 5-50 Nm VAG 1331
- Bracket 30-211A
- Driving Sleeve 32-111
- Thrust Piece T10030/4 from Assembly Tool T10030
- Tube 37 mm Dia. VW 416B
- Puller T10408
- Thrust Piece T10408/2
- Plate T10408/3
- Support Bridge T10323
- Subframe Support Assembling Device 3253/7
- Thrust Pad Con. 8/65 VW 433
- Torque Wrench 1332 40-200 Nm VAG 1332
- Puller - Kukko Puller - 60-150mm Width, 200mm Length 18/1 (Qty: 2)
- Sealing Paste AMV 188 200 03
- M8 x 100 mm Stud Bolt