Transmission Housing, Servicing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Needle Bearing Drift VW 295
Adapter VW 295 A
Thrust Pad VW 447 H
Thrust Pad VW 512

Fig 1: Driving Out Needle Bearing

Fig 2: Driving In Needle Bearing To Stop

-- Secure the needle bearing at three points inside the transmission housing, offset by 120°, using a mandrel.

Fig 3: Identifying Oil Collector Tray Installed Into Transmission Housing

-- Insert the oil catch tray -A- into the hole -arrow 1- and groove -arrow 2- at the same time.