Clutch Housing, Servicing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Slide Hammer-Complete Set VW 771
Additional Part for VW 771 VW 771/37
Spindle from the Seal Installer Driver Set 3066
Thrust Piece T10148

Fig 1: Identifying VW 771/37 Tool To Pull Out Sleeve And Seal

The sleeve has a shoulder on the inside.

-- Mount the additional part for VW 771 VW 771/37 behind the shoulder inside the sleeve.

-- Using force, push the additional part for VW 771 VW 771/37 into the sleeve.

Fig 2: Identifying Spindle And Nut To Pull Sleeve And Seal

-- Clean the seat for the shaft seal inside the transmission.

-- Attach the spindle -A- on the seal installer set - rear diff 3066 into the threaded piece on the differential.

-- Turn the nut -B- and pull the seal with sleeve all the way over the thrust piece T10148.

NOTE:

If the transmission is disassembled, press the seal and sleeve in until seated using the thrust pad T10148.