Left Footwell Vent Temperature Sensor -G261-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driver footwell vent. Refer to DRIVER SIDE FOOTWELL VENT .

-- Disconnect the connector -2- from the Right Footwell Vent Temperature Sensor -G261- -1-.

Fig 1: Identifying Left Footwell Vent Temperature Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn the Left Footwell Vent Temperature Sensor -G261- -1- 90° in the direction of the -arrow- and remove it from the housing.