Condensation Water Drain: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. When doing this, note the following:

The condensation water drain hose must be free of tension when it is connected to the heater and A/C unit.
The condensation water drain hose must be secured on the heater and A/C unit.
The condensation water drain hose must not under any circumstances be bent or kinked.

-- Install the right footwell trim panel (in the center console). Refer to REMOVAL AND INSTALLATION .

NOTE:

Checking, refer to CONDENSATION WATER DRAIN, CHECKING