Air Quality Sensor -G238-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the right plenum chamber cover. Refer to DESCRIPTION AND OPERATION REMOVING ADHESIVE .

-- Remove the cover above the fresh air intake.

-- Disconnect the connector -1- from the Air Quality Sensor -G238-.

Fig 1: Identifying Air Quality Sensor

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the Air Quality Sensor -G238- and turn it 90° out of the bracket.