LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (2.0L - Fuel Mixture Preparation & Fuel Injection - Engine Code(S): CJAA & CVCA (Hatchback)) >> 23 Fuel Mixture Preparation, Fuel Injection >> Removal And Installation >> High Pressure Lines, Installing >> Tightening Sequence And Tightening Specification

Tightening Sequence And Tightening Specification

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Tightening sequence Tightening specification
1. Tensioning claw bolt 8 Nm +180°
2. High pressure line between the fuel rail and the fuel injector 28 Nm
3. High pressure line between the fuel rail and the high pressure pump 28 Nm
4 bolts fuel rail 22 Nm
5. High pressure line clamps between the fuel rail and the high pressure pump 8 Nm
scientia non olet · About LEMON Manuals