LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Brake System - Hydraulic Components (Hatchback)) >> 47 Hydraulic Components >> Removal And Installation >> Vacuum Sensor -G608- >> Removing

Vacuum Sensor -G608-: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Remove the vacuum line, if necessary. Refer to -item  17-.

-- Release clips with pliers -1-.

Fig 1: Identifying Brake Booster Pressure Sensor G294, Clips And Pliers
GWWA47-10021Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Carefully pry out the Brake Booster Pressure Sensor -G294- -2-.

scientia non olet · About LEMON Manuals