Overview - FLANGING Tool
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Flanging Tool Upper Section
- Remove to change Clamp Jaws
- Hand Grip Mount
- Must be removed to reach the upper section retaining bolt
- Bolt
- For upper part of flaring tool
- Clamp Jaws threaded pins
- Center and hold the Clamp Jaws
- 2 mm inner hex socket
- Clamp Jaws
- Various
- Assembly instructions. Refer to Fig 2
- Brake Line Tool Kit VAS6056/6 (dark) for black brake lines
- Brake Line Tool Kit VAS6056/7 (light) for green brake lines
NOTE:
The arrow on the rounded side of the Clamp Jaws must point toward the edge of the housing.
The straight side of the Clamp Jaws must be installed toward spindle, otherwise flared head will not be formed correctly.