Fastener Tightening Specifications
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Fastener Size | Nm |
|---|---|---|
| Air filter housing to body, screw | - | 10 |
| B+ terminal of Generator | - | 20 |
| B+ wire to Starter nut | - | 20 |
| Battery terminal nuts | - | 6 |
| Battery clamping plate bolt | - | 20 |
| Battery tray bolts | - | 9 |
| Generator to accessory bracket collar bolts2 | - | 25 |
| Generator to accessory bracket collar bolts1 | - | 20 |
| Generator cap phillips head screw1 | - | 5 |
| Generator cap hex head nut1 | - | 15 |
| Ribbed belt pulley without freewheel | - | 65 |
| Ribbed belt pulley free-wheeling | - | 80 |
| Starter bolts | M12 | 75 |
| M10 | 40 | |
| Starter wiring bracket nut | - | 20 |
| Voltage Regulator, hex bolt with washer and threaded piece | - | 4 |
| Voltage Regulator screws | - | 2 |
| Wire bracket nut to the back of the Generator | - | 3 |
|
||