ADAPTING Battery Monitoring Control Module -J367-: Procedure
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Connect the Vehicle Diagnostic Tester.
-- Select Guided Fault Finding .
-- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:
- Body
- Electrical System interior/exterior
- 01 - OBD
- 61 - Battery regulation
- 61 - Battery control functions
- 61 - Replace control module
After the "replace the Battery Monitoring Control Module" procedure occurs, the "starting after replacing" procedure must be performed.
-- Connect the Vehicle Diagnostic Tester.
-- Select Guided Fault Finding .
-- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:
- Body
- Electrical System interior/exterior
- 01 - OBD
- 61 - Battery regulation
- 61 - Battery control functions
- 61 - Starting after replacing