LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Controls, Housing - Automatic Transmission 09G (Hatchback)) >> 37 Controls, Housing >> Removal And Installation >> Transmission >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Transmission to engine

NOTE: The -arrows- point to the alignment sleeves in the engine.
Fig 1: Identifying Tightening Torques, Transmission To Engine (Rabbit/GTI 2006 With 2.5L - 110 kW Engine, Tightening Torques)
GWWN37-10331Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. 1 -

    Direction of Travel

  2. M12 -

    80 Nm

    • Is the Insert Tool - 18 mm T10179 is used: 65 Nm
  3. M10 -

    40 Nm

Component Tightening Specification
Drive plate to torque converter 60 Nm
Selector cable bracket on transmission 8 Nm
Cable mounting bracket to transmission 20 Nm
scientia non olet · About LEMON Manuals