Selector Lever Handle: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

The handle is removed together with the shift cover.

-- Move the selector lever into "D".

It is not necessary to pull out the button -A- manually. The push button locks in the installation position by itself when the handle is removed.

Fig 1: Removing Selector Lever Handle

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Unclip the cover -B- carefully using Trim Removal Wedge 3409.

-- Fold the cover -B- up over the handle.

Fig 2: Opening Clamp

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -A- from the Selector Lever Scale Illumination Bulb -L101-.

-- Open the clamp -arrow- under the handle.

-- Pull the handle with the cover upward. Do not press the button while doing this.