Securing On Engine And Transmission Holder: Procedure

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Secure Transmission To Holding Fixture VW 540 And VW 313

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Drain the ATF. Refer to Procedure .

-- Secure the transmission to the Holding Fixture VW 540 -arrows-.

-- Using the Shop Crane VAS 6100, insert the transmission into the Holding Fixture VW 313 or Engine and Transmission Holder VAS 6095.

WARNING: The center of gravity of the transmission is outside center of rotation at holding fixture. To prevent back swing, a second technician must hold transmission housing when rotating the transmission on the Holding Fixture VW 313.