Removing the Wheel Bolt Caps

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: On vehicles with alloy wheels, do not pry out wheel bolt cover caps with screwdriver. Rather, use special tool designed for this purpose (puller hook in vehicle tool kit).

NOTE: Wheel bolt cover caps must be removed before wheel bolts can be loosened.

The pulling hook for removing the cover caps is located in the vehicle tool kit.

Fig 1: Identifying Pulling Hook To Remove Cover Caps

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the wire through the opening in the cap.

-- Remove the cap.