Installing the Center Wheel Trim, Wheel Bolt Caps and Decorative Wheel Hubcap

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Press the center hubcap on to the opening. Make sure -A and B- fit exactly onto the rim.

Fig 1: Identifying Center Hubcap Pressed On Opening To Fit Exactly On Rim

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install the caps on the wheel bolts.

Fig 2: Identifying Installation Of Caps On Wheel Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install the wheel hubcap evenly onto the steel rim. Make sure the valve -B- is seated inside the opening -A- in the cap.

Fig 3: Identifying Alignment Of Valve Recess In Wheel Cover To Inflating Valve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE: Place the adapter and extractor back in the vehicle tool kit.