LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Maintenance Procedures (Hatchback)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Wheel Bolts, Tightening To Tightening Specification >> Anti-Theft Wheel Bolts, Loosening and Tightening

Anti-Theft Wheel Bolts, Loosening and Tightening

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Anti-Theft Wheel Bolt And Key
GWWN01-10639Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

A special adapter is required to loosen/tighten anti-theft wheel bolts. It is included in the vehicle tool kit.

Do not use an impact wrench to loosen anti-theft wheel bolts (lockable wheel bolts).

If the adapter to loosen/tighten the anti-theft wheel bolts is not present in the vehicle, use the master wheel bolt key set.

Special tools and workshop equipment required 

-- Slide the adapter -2- into the anti-theft wheel bolt -1-.

Fig 5: Identifying Anti-Theft Wheel Bolt And Key
GWWN01-10639Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Slide the wrench over the adapter -2-.