Remove Engine Cover 1

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the hose off the connection -arrow A- if equipped.

-- Disengage engine cover at fastening points -arrows B- and lift.

-- Then remove from bracket -arrow C-.

-- Slide engine cover -1- with tab -arrow A- at fastening point -2- into bracket -arrow B-.

Fig 2: Identifying Engine Cover And Bracket

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Then position engine cover on other fastening points and press on -arrow B- until you hear them engage.

Fig 3: Identifying Engine Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Connect the hose on the connection -arrow A- if equipped.