Perform the Basic Setting
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch on the ignition.
-- Press the SET button inside the glove compartment for more than two seconds.
The Tire Pressure Monitoring System Display Indicator Lamp -- in the instrument cluster -arrow- stays on as long as the button is pressed.
Beginning of basic setting is confirm by a notifying tone.
On next new ignition start, warning does not appear.