1.8L (125 Kw) And 2.0L (155 Kw) TSI Engine: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the "upper" engine cover. Refer to UPPER ENGINE COVER, REMOVING AND INSTALLING .

-- Disengage the connectors -1- through -4- and at the same time remove all of the plugs from the ignition coils with the power output stage in direction of the arrow.

Fig 1: Identifying Ignition Coils

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the ignition coils with the power output stage bolts -arrows-.

Fig 2: Identifying Ignition Coil Stage Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the ignition coils with the power output stage upward.

NOTE:

Note the installed position of ignition coils with power output stages.

Be careful to not kink or damage the wiring.

-- Remove spark plugs with Spark Plug Removal Tool 3122 B.