RADIO CODE, CHECKING WITH Vehicle Diagnostic Tester: Procedure
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Connect the Vehicle Diagnostic Tester. Refer to Vehicle Diagnostic Tester .
-- Switch on the ignition.
-- Select >>Guided Functions<<.
-- Select the following one after the other:
- Brand
- Type
- Model year
- Engine code
-- Confirm the VIN.
-- Select the following one after the other:
- "Radio system".
- "Request radio code".
-- Perform code request following the "Guided Functions".
Ending the Adaptation:
-- Select Go to and then press End .
-- Turn off the ignition and disconnect the diagnostic connector.
-- Switch on the ignition.