Performing the Basic Setting
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Connect the Vehicle Diagnostic Tester. Refer to Vehicle Diagnostic Tester .
-- Switch on the ignition.
-- Select "Guided Functions".
-- Select the VIN.
-- Select 55 - headlamp range control.
-- Mark "perform basic setting" and confirm with →.
-- Observe displayed notes and confirm by selecting "complete".
-- Headlamps, Checking and Adjusting