Display Control Head, Front Section: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the trim -1- with the Trim Removal Wedge 3409. Refer to REMOVAL AND INSTALLATION .

-- Remove the screws -2- from the display control head -3- (1.5 Nm).

Fig 1: Identifying Screws And Display Control Head

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the screws -1- (1.5 Nm).

-- Remove the display control head front section -3- from the rear section while disconnecting the connectors for the wiring harnesses -2-.

Fig 2: Identifying Wiring Harnesses

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.