Refrigerant Circuit Connections With Valve For Switches
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For switching pressures, removing and installing switches and switch arrangement and version, see vehicle-specific refrigerant circuit.
Refer to REFRIGERANT CIRCUIT .
WARNING:
There is a danger of ice-up.
Refrigerant will leak out if refrigerant circuit is not discharged.
Refrigerant must be extracted before removing valve -C-. If refrigerant circuit is not opened within 10 minutes of extraction, pressure may form in refrigerant circuit due to evaporation. Extract the refrigerant once more.
- Different threads for switch on high pressure and low pressure sides.
- Only valves and o-rings that are resistant to refrigerant R134a and refrigerant oil must be installed.
A -
Connection (soldered in)
B -
O-Ring
C -
Valve (with o-ring)