LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Refrigerant R134A Servicing (Convertible)) >> 00 General, Technical Data >> Connecting Service Station >> Refrigerant Circuit, Connection On Low And High Pressure Side >> A/C Service Station, Connecting For Measuring And Testing

A/C Service Station, Connecting For Measuring And Testing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Connect the A/C service station to the power supply.

-- Connect quick-release coupling adapter to charging hoses of service station (handwheels not screwed in/hand shut-off valve not open).

-- Switch on service station and evacuate charging hoses (only necessary if there is air in charging hoses).

-- Switch off A/C service station.

-- Remove caps from service connections (with valve).

-- Connect the A/C service station to the refrigerant circuit using service connections with quick-release coupling adapters.

-- Screw in handwheel of quick-release coupling adapters only until valves are definitely open at refrigerant circuit connection (observe pressure gauge, do not strain valves).

-- Perform planned tests and measurements.

scientia non olet · About LEMON Manuals