Toothed Gears, Synchronizer Hubs
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Heat the synchronizer hub to approximately 100°C (212°F) using the inductive heat unit VAS 6414 before installing. Press on until seated when installing so there is no axial play.
- Heat the toothed gears to approximately 100°C (212°F) using the inductive heat unit VAS 6414 before installing. Press on until seated when installing so there is no axial play.
- Pay attention to the installed position.