Codes Letters, Allocation And Capacities
WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- The individual gear ratios.
- Final drive ratio.
- Clutch allocation.
- Transmission fluid specification.
| Manual Transmission |
5 Speed Manual Transmission 0A4 |
| Identification codes |
LPU |
| Manufactured |
from through |
05.11 |
| Allocation |
Type |
Beetle from MY 2012 |
| - |
Engine |
2.5 L - 125 kW |
| Manual Transmission Capacity (Transmission Completely Disassembled) |
Refer to Fluid Capacity Tables |
| Manual transmission capacity (transmission partly disassembled), refer to TRANSMISSION FLUID, CHECKING AND REPLACEMENT |
| Drive Axle Flange Diameter |
100 mm |
| Manual Transmission |
5-Speed Manual Transmission 0A4 |
| Codes |
NZB |
- |
- |
| Manufactured |
from through |
05/2013 |
- |
- |
| Allocation |
Type |
Beetle from MY 2012 The Beetle Cabriolet from MY 2012 |
- |
- |
| - |
Engine |
1.8L - 125 kW |
- |
- |
| Driveshaft Flange Diameter |
100 mm |
- |
- |
- The individual gear ratios
- Final drive ratio
- Clutch allocation
|