Glove Compartment Cooling: Installing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Install the hose for the glove compartment cooling in reverse order. When doing this, note the following:
- The hose fits in only one position on the heater and A/C unit connection -2-. The cut-out on the hose must line up with the tab.
- The hose must not get bent or squeezed.