Working On Turbocharger
WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
When working on the turbocharger, carefully observe the following rules for clean working conditions:
- Always clean the connection locations and the area around them before loosening.
- Place removed parts on a clean surface and cover them. Use a lint-free cloth.
- Carefully cover or plug unpacked components if repairs cannot be performed immediately.
- Install only clean parts: remove the replacement parts from their packaging just before installing them. Do not use parts that have been stored loose (for example, in tool boxes etc.).
- Supplied transport and protective packaging and sealing cover should only be removed immediately before installing.
- During repairs, clean oil from connections and hose ends.
- When the system is open: do not work with compressed air. Do not move vehicle unless absolutely necessary.