Cooling System Safety Precautions

WARNING: This page is about a different car, the 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Hot steam may escape when opening the reservoir.

Wear protective goggles and protective clothing to prevent damage to eyes and scalding.
Cover the cap with a cloth and open very carefully.

CAUTION: When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

Route all lines in their original locations.
To prevent damage to the lines, make sure there is sufficient clearance to all moving or hot components.

NOTE:

When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work.

Secure all hose connections with hose clamps.

Spring Clip Pliers VAS 6499 are recommended for installing spring-type clamps.

Always replace gaskets and seals.

Route the coolant hoses free of tension.

Coolant hoses must not come into contact with other components.

Pay attention to the markings on the coolant connection and hoses.