EVAP Canister, EVAP Canister In Right Rear Wheel Housing: Removing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right rear wheel housing liner. Refer to REMOVAL AND INSTALLATION .
-- Remove the rear bumper cover. Refer to REMOVAL AND INSTALLATION .
-- Remove the right side guide profile. Refer to DESCRIPTION AND OPERATION .
-- Remove the line -2 and 3-. Refer to CONNECTOR COUPLINGS, SEPARATING .
-- Loosen the retainer for the bracket from the bumper on the bottom of the body -lower left bubble- and remove the bracket.
-- Loosen the bolt and nut -arrows- from the EVAP canister -1-.
-- Loosen the EVAP canister from the mount in the longitudinal member and disconnect the connector from the leak detection pump.
-- Remove the EVAP canister.