LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (1.8L, 2.0L & 2.5L - Fuel Supply - Engine Code(S): CBTA, CBUA, CCTA, CPKA, CPLA, CPPA & CPRA (Convertible)) >> 20 Fuel Supply >> Removal And Installation >> EVAP Canister >> EVAP Canister, EVAP Canister In Engine Compartment >> Removing

EVAP Canister, EVAP Canister In Engine Compartment: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the vent line -arrow-. Refer to CONNECTOR COUPLINGS, SEPARATING .

Fig 1: Locating Tab
GWWM10-10101Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the line -2- on the Evaporative Emission (EVAP) canister.

-- Release the tab -3- in direction of -arrow- and remove the EVAP canister -1- upward.

-- Remove the EVAP canister -1- upward out of the bracket.