LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (1.8L, 2.0L & 2.5L - Fuel Supply - Engine Code(S): CBTA, CBUA, CCTA, CPKA, CPLA, CPPA & CPRA (Convertible)) >> 20 Fuel Supply >> Description And Operation >> Connection Diagram - EVAP System >> EVAP Canister System Connection Plan, EVAP Canister In Right Rear Wheel Housing

EVAP Canister System Connection Plan, EVAP Canister In Right Rear Wheel Housing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of EVAP Canister System Components
GWWN20-10892Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Evaporative Emission (EVAP) Canister
    • Component location: under the wheel housing liner inside right rear wheel housing
    • Removing and installing. Refer to EVAP CANISTER .
  2. Air Filter
    • For the Leak Detection Pump -V144-
  3. Leak Detection Pump -V144-
    • Vehicles with engine codes (CBTA, CBUA, CCTA, CBFA, CCZA)
    • Component location: under the wheel housing liner inside right rear wheel housing
    • Checking See Vehicle Diagnostic Tester.
    • Removing and installing. Refer to LEAK DETECTION PUMP .
  4. Breather Line
    • From the filler tube to the EVAP canister
  5. Filler Neck
  6. Fuel Supply Line
    • Black
  7. Breather Line
    • White
  8. EVAP Canister Purge Regulator Valve 1 -N80-
    • Checking see Vehicle Diagnostic Tester.
  9. Throttle Valve Control Module -J338-
scientia non olet · About LEMON Manuals