LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Wheels, Tires & Wheel Alignment (Hatchback)) >> 44 Wheels, Tires, Wheel Alignment >> General Information >> Wheel/Tire Vibration, Causes And Solution >> Wheel, Balancing On Stationary Balancing Machine >> Road Test, Performing

Road Test, Performing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Perform a road test after balancing the wheel/tires.

If a vibration is still detected during the road test, the cause may be due to tolerance in the wheel centering.

The component tolerances of wheels and wheel hubs can be additive in unfavorable cases. Vibration can result from this. This can be eliminated using a finish balancer. Refer to WHEEL, BALANCING WITH FINISH BALANCER .

scientia non olet · About LEMON Manuals