Checking Lateral Run-Out
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Load the Tire Dial Gauge approximately 2 mm.
-- Set up Tire Dial Gauge on the side wall of the tire.
-- Rotate the wheel slowly.
-- Note the smallest and the largest dial readings.
NOTE:
If the difference is greater than 1.3 mm, the lateral run-out is too great.
In this case, lateral run-out can be reduced by matched mounting of the tire. Refer to WHEELS AND TIRES, MATCHING .
Peak values on the Tire Dial Gauge due to small irregularities in the rubber may be disregarded.