LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Wheels, Tires & Wheel Alignment (Hatchback)) >> 44 Wheels, Tires, Wheel Alignment >> General Information >> Wheel/Tire Vibration, Causes And Solution >> Flat Spots In Tires From Standing, Determining >> Notes

Flat Spots In Tires From Standing, Determining: Notes

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

What is a Flat Spot from Standing?

Terms like flat portion, flattening, are also used as a term for flat spots from standing.

Flat spots from standing cause vibration, like an incorrectly balanced wheel. It is important to recognize a flat spot in the tread from standing as such!

Flat spots from standing cannot be corrected by balancing, and can occur again at any time under various circumstances. Flat spots from standing can be corrected without complicated special tools. Providing that the flat spot was not caused by wheel lock during hard braking FLAT SPOTS IN TIRES FROM STANDING .

NOTE: Wear spots due to wheel lock are irreparable! Tires with such damage must be replaced.

Causes of Flat Spots from Standing: