LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Wheels, Tires & Wheel Alignment (Hatchback)) >> 44 Wheels, Tires, Wheel Alignment >> General Information >> Vehicle Alignment >> Evaluating Need For Axle Alignment, Multi-Link Suspension >> Components Removed and Installed

Components Removed and Installed

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Components of Front Axle Removed and Installed Wheel Alignment Check Required Components of Rear Axle Removed and Installed Wheel Alignment Check Required
- Yes No - Yes No
Lower Control Arm - X(1) Lower Transverse Link X -
Wheel Bearing Housing - X Upper Transverse Link X -
Tie rod/tie rod end X - Tie Rod X -
Steering Gear X - Wheel Bearing Housing X -
Subframe - X(1) Subframe X -
Suspension Strut - X Coil Spring - X
Stabilizer Bar - X(1) Shock Absorber - X
- - - Stabilizer Bar - X
- - - Trailing link X -
(1) Requirement: Subframe and brackets were secured before removal. Refer to SUBFRAME, SECURING .
scientia non olet · About LEMON Manuals