Hub Cap, Light Alloy Wheel With Open Threaded Connection: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Hold the cap -1- flush against the opening in the aluminum rim.

Fig 1: Identifying And Aligning Wheel Cap

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Line up the Volkswagen logo on the cap with the valve so that the logo is centered over the valve -2-.

-- Press on the cap so that it is secure inside the opening in the aluminum rim.

-- Make sure the cap it secure inside the aluminum rim.