LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Wheel & Tire Guide (Hatchback) (1 Of 2)) >> 44 Wheels, Tires, Wheel Alignment >> General Information >> Wheel And Tire Vibration >> Disc Wheel, Checking Radial And Lateral Run-Out >> Notes

Disc Wheel, Checking Radial And Lateral Run-Out: Notes

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Mount the disc wheel on the wheel balancer.

-- Use the wheel balancing machine centring system VAS 5271.

-- Load the tire dial gauge approximately 2 mm.

-- Slowly turn the disc wheel.

-- Note the smallest and the largest dial readings.

Fig 1: Identifying Areas To Check Wheel For Radial Run-Out & Lateral Run-Out
GWWN44-0231Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

S - Lateral run-out

H - Radial run-out

-- Compare determined value with specifications in the table.

NOTE:

Peak values on the tire dial gauge due to small irregularities may be disregarded.