Special Tools

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Thrust Pad VW512
Replacement Stud (8 mm/10 mm) 3114/2
Thrust Pad VW447 H
Press Piece - Multiple Use VW412
Tube Split VW422
Press Plate VW401
Punch VW408 A
Tube 28 mm Dia. 100 mm VW421
Mounting Universal Joint 41-501
Tapered Roller Bearing Puller VAG1582
Attachment to VAG 1582V.A.G 1582/4
Attachment to VAG 1582V.A.G 1582/5
Driving Sleeve 32-111
Punch VW409
Support ChannelsVW457
Sleeve VW519
Thrust Ring VW429
Tube 60 mm Dia. VW415 A
Thrust Tube VW455
Punch VW411
Centering Mandrel 12-551
-1- Kukko Extractor 37-46 mm21/6
-1- Kukko Extractor 14.5-18.5 mm Kukko 21/2
-3- Kukko Separating Tool 22-115 mm17/2
-3- Kukko Separating Tool 12-75 mm17/1
-4- Kukko Support 22/1
-4- Puller - Kukko Counterstay 22/2

Fig 1: Identifying Kukko Tools
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Press Plate VW402

Fig 2: Identifying Thrust Plate VW 402
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Inductive Heat Unit VAS6414

Fig 3: Identifying Inductive Heater VAS 6414
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Needle Bearing Drift VW295

Fig 4: Drift Needle Bearing Drift VW 295
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Adapter VW295 A

Fig 5: Needle Bearing Drift VW 295 A
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Thrust Tube VW454

Fig 6: Identifying Thrust Tube VW 454
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Press Tube 2040

Fig 7: Tube 2040
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 8: Identifying Special Tools -- Input Shaft, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Dial Gauge Holder VW387
Magnetic Plate 50 mm Dia.VW385/17
Thrust Pad VW510
Thrust Pad VW447 i
Punch VW407
Torque Wrench 1331 5-50 NmVAG1331