Reverse Shaft Overview

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Always replace the needle sleeve after removing it from the clutch housing or from the reverse shaft support.

Fig 1: Clutch Housing Remove/Install Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Clutch Housing
Needle Sleeve
- Removing, refer to Figure.
- Installing, refer to Figure.
Reverse Gear Drive Gear
Lock Ring
- Always replace after removing.
Reverse Gear
- Remove before replacing the lock ring.
- Collar faces the reverse gear.
Reverse Gear Shaft
- Removing, refer to TRANSMISSION .
Needle Sleeve
- Removing, refer to Figure.
- Installing, refer to Figure.
Reverse Gear Shaft Support
- Removing and installing, refer to TRANSMISSION .