Special Tools

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Punch VW408A
Thrust Piece VW473
Press Support-R&I Wheel Brg's 3144
Thrust Pad 2007
Torque Wrench 1332 40-200Nm VAG1332
Thrust Piece T10160
Sleeve 40-21

Fig 1: Sleeve 40 - 21
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Thrust Piece 40-105

Fig 2: Identifying Thrust Piece 40-105
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Inductive Heat Unit VAS6414

Fig 3: Identifying Inductive Heater VAS 6414
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 4: Identifying Special Tools -- Right Drive Flange Shaft Oil Seal, Replacing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Seal Installer - One-Piece Seal T10148
Spindle from Seal Installer-Driver Set 3066
Slide Hammer-Complete Set VW771
Slide Hammer Set - Hook VW771/37
Torque Wrench 1331 5-50Nm VAG1331

Fig 5: Identifying Special Tools -- Differential, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Magnetic Plate 50 mm Dia.VW385/17
Dial Gauge Holder VW387
Punch VW407
Thrust Pad 30-205
Torque Wrench 1331 5-50Nm VAG1331
-1- Puller - Kukko Internal - 46-56mm 21/7
-4- Puller - Kukko Counterstay 22/2

Fig 6: Identifying Special Tools -- Differential, Disassembling And Assembling

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required

Tapered Roller Bearing Puller VAG1582
Attachment to VAG 1582 VAG1582/3
Press Piece - Multiple Use VW412
Press Plate VW401
Press Plate VW402