Adjustment Overview

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If repairs have been performed on the transmission, it is only necessary to adjust the input shaft, output shaft or differential if components have been replaced which have a direct effect on the adjustment of the transmission, refer to Table to avoid any unnecessary adjusting.

		To be adjusted:
		Input shaft, refer to INPUT SHAFT, ADJUSTING	Output shaf, refer to OUTPUT SHAFT, ADJUSTING	Differential, refer to DIFFERENTIAL, ADJUSTING
Replaced part:	Transmission housing	x		x
	Clutch housing	x	x	x
	Input shaft	x
	Output shaft		x
	Differential housing			x
	Output shaft tapered roller bearing	x
	Output shaft tapered roller bearing		x
	Differential tapered roller bearing			x
	4th Gear	x