Checking The Measurement: Notes
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- The selected adjusting shim is installed.
-- Position the measuring tools onto the clutch housing and secure them with the bolt -arrow-.
-- Set the dial gauge (3 mm range) with a 1 mm preload to "0".
-- Loosen the bolts for the clutch housing/transmission housing in a diagonal sequence until the bolts clear the transmission housing and output shaft.
-- For a correctly selected adjustment shim, the dial gauge must now display a value of 0.15 mm to 0.25 mm.