Special Tools

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Punch VW 408 A
Thrust Disc VW 412
Tube 60 mm Dia. VW 415 A
Thrust Piece 40-105
Drip Tray for VAS 6100 VAS 6208

Fig 1: Drip Tray For Shop Crane VAS 6208
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Thrust Piece 3305

Fig 2: Identifying Thrust Piece 3305
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Inductive Heat Unit VAS 6414

Fig 3: Identifying Inductive Heater VAS 6414
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Fig 4: Identifying Special Tools - Differential, Adjusting

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required

Transmission Support VW 353
Magnetic Plate 50 mm Dia. VW 385/17
Dial Gauge Holder VW 387
Thrust Plate VW 402
Punch VW 408 A
Thrust Pad 3005

Fig 5: Identifying Special Tools - Oil Seal For Left Flanged Shaft, Replacing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required

Slide Hammer-Complete Set VW 771
Additional Part for VW 771 VW 771/37
Thrust Piece 3305
Torque Wrench (5-50 Nm) VAG 1331
Torque Wrench (40-200 Nm) VAG 1332

Fig 6: Identifying Special Tools - Differential, Disassembling And Assembling

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special Tools And Workshop Equipment Required

Tube 3259
Tube 3296
Press Tool 3345
Tapered Roller Bearing Puller VAG 1582
Attachment to VAG 1582 VAG 1582/6A
-1- Kukko Extractor 46-58 mm 21/7
-2- Kukko Puller (65-160 mm) 18/1
-3- Kukko Separating Tool 12-75 mm 17/1
-4- Kukko Support 22/2